dynarex Ever-Soft 10671 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} dynarex Ever-Soft 10671에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. dynarex Ever-Soft 10671 2 페이지. Air cushion

페이지 인쇄

1. Cells

2. Hand pump

3. Valve

4. Black rope

1. Cells: Made of medical rubber & PVC.

2. Hand pump: Used to inflate the cushion with air.

3. Valve: Each cushion has a valve which is used to adjust the air

inside cushion and softness of cushion.

4. Black rope: For carrying or lifting the cushion.

5. Repair kit: Includes glue and two patches of film to repair

small holes.

6. User manual: Provides instruction on adjustment, care and repair.

7. Polyester cover: Helps keep the cushion surface clean and

prevents cushion from sliding.

INSTRUCTIONS

1. Place the air cushion on chair. Air

cells should be facing up and the

valve should be positioned in the

front. Turn valve counterclockwise

to open.

7. Cover

6. User manual

5. Repair kit

2. Slide the silicone pump nozzle

over the valve. Inflate until the

cells begin to arch upwards.

3. Turn valve clockwise to

close and remove the

hand pump.

5. Place your hand between

cushion and the patient's

lowest penetrating bony

prominence.

4. While the cushion is in this

over-inflated condition, place

the patient on the cushion in

his/her normal sitting position

with arm and foot rests

properly placed.

6. With your hand in place, slowly

turn the valve counterclockwise

to release some air to immerse

the patient in the cushion in

order to achieve the desired

personal comfort level. The

inflation height should be no

more than 1" and no less than

½" of cushioning between the

chair and the lowest penetrating

bony prominence.