dynarex Ever-Soft 10671 Snelstarthandleiding - Pagina 2
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} dynarex Ever-Soft 10671. dynarex Ever-Soft 10671 2 pagina's. Air cushion
Pagina afdrukken1. Cells
2. Hand pump
3. Valve
4. Black rope
1. Cells: Made of medical rubber & PVC.
2. Hand pump: Used to inflate the cushion with air.
3. Valve: Each cushion has a valve which is used to adjust the air
inside cushion and softness of cushion.
4. Black rope: For carrying or lifting the cushion.
5. Repair kit: Includes glue and two patches of film to repair
small holes.
6. User manual: Provides instruction on adjustment, care and repair.
7. Polyester cover: Helps keep the cushion surface clean and
prevents cushion from sliding.
INSTRUCTIONS
1. Place the air cushion on chair. Air
cells should be facing up and the
valve should be positioned in the
front. Turn valve counterclockwise
to open.
7. Cover
6. User manual
5. Repair kit
2. Slide the silicone pump nozzle
over the valve. Inflate until the
cells begin to arch upwards.
3. Turn valve clockwise to
close and remove the
hand pump.
5. Place your hand between
cushion and the patient's
lowest penetrating bony
prominence.
4. While the cushion is in this
over-inflated condition, place
the patient on the cushion in
his/her normal sitting position
with arm and foot rests
properly placed.
6. With your hand in place, slowly
turn the valve counterclockwise
to release some air to immerse
the patient in the cushion in
order to achieve the desired
personal comfort level. The
inflation height should be no
more than 1" and no less than
½" of cushioning between the
chair and the lowest penetrating
bony prominence.