dynarex 10443 사용자 설명서 - 페이지 3

{카테고리_이름} dynarex 10443에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. dynarex 10443 4 페이지. Air mattress with digital pump

dynarex 10443 사용자 설명서
(1) Pillow Section - does not alternate
(2) Cover
(3) Fixing belt
(4) Low air loss holes
(5) Male quick connector
(6) Air tubing
(7) CPR Valve
CELL-ON-CELL FEATURE
The mattress is an 8" cell-on-cell type
mattress which prevents bottoming out in
case of a sudden power outage. The
mattress will temporarily retain air even when
the pump is turned off or during a power
outage.
Please note this is only temporary.
The cover sheet protects the cells against
unexpected contamination, and makes
cleaning of the mattress easier.
3
INSTALLATION
1. This is a replacement mattress. Place the mattress directly on the
bed frame, with the air hose connectors positioned at the footboard.
2. Hang the pump onto the bed board (footboard side) using the hooks
on back of the pump, or place it on a flat surface.
3. Connect air hose connectors from air mattress to the pump unit.
Ensure the air hoses are not kinked or tucked under the mattress.
4. Plug the power cord into the electrical outlet.
5. Turn the power ON.
5