High Lifter Signature Series 설치 지침 매뉴얼 - 페이지 4

{카테고리_이름} High Lifter Signature Series에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. High Lifter Signature Series 12 페이지. Yamaha wolverine 850 x2/x4

5. If you have an X4 model, insert the spacer (O) between the shock mount tabs. If you have an X2 model,

insert and use spacer (81i) instead. Push the bolt through the spacer then slide the bolt through the

lowest hole on the long lift bracket and out through the inner shock mount tab. Loosely fasten it with a

(10mm lock nut).

6. Next, insert a bolt (10mm x 85mm bolt) through the next hole of the lift bracket. Place a spacer (9Y)

between the lift brackets. Slide the bolt through the spacer and out through the other lift bracket.

7. Now slide spacer (73P) over the threaded end of the bolt. Loosely fasten it with a (10mm lock nut).