High Lifter Signature Series Panduan Petunjuk Instalasi - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Aksesori Mobil High Lifter Signature Series. High Lifter Signature Series 12 halaman. Yamaha wolverine 850 x2/x4

Halaman Cetak

5. If you have an X4 model, insert the spacer (O) between the shock mount tabs. If you have an X2 model,

insert and use spacer (81i) instead. Push the bolt through the spacer then slide the bolt through the

lowest hole on the long lift bracket and out through the inner shock mount tab. Loosely fasten it with a

(10mm lock nut).

6. Next, insert a bolt (10mm x 85mm bolt) through the next hole of the lift bracket. Place a spacer (9Y)

between the lift brackets. Slide the bolt through the spacer and out through the other lift bracket.

7. Now slide spacer (73P) over the threaded end of the bolt. Loosely fasten it with a (10mm lock nut).