High Lifter Signature Series Panduan Petunjuk Instalasi - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Aksesori Mobil High Lifter Signature Series. High Lifter Signature Series 12 halaman. Yamaha wolverine 850 x2/x4

Halaman Cetak

8. Next you will reconnect the top of the shock to the lift brackets. Slide a (10mm x 70mm bolt) through

the third outer hole of the bracket and then place a small spacer (AA) over the threaded end of the bolt.

9. Slide the bolt through the shock eye and out through the other lift bracket. Loosely fasten it with a

(10mm lock nut).

10. Repeat steps for the opposite side.

11. Once all the brackets and bolts are in place, double check everything and fasten all the nuts tight.

12. Place wheels back on the UTV, torque all lugs to factory specifications.