High Lifter Signature Series Kurulum Talimatları Kılavuzu - Sayfa 5

Otomobil Aksesuarları High Lifter Signature Series için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. High Lifter Signature Series 12 sayfaları. Yamaha wolverine 850 x2/x4

Sayfayı Yazdır

8. Next you will reconnect the top of the shock to the lift brackets. Slide a (10mm x 70mm bolt) through

the third outer hole of the bracket and then place a small spacer (AA) over the threaded end of the bolt.

9. Slide the bolt through the shock eye and out through the other lift bracket. Loosely fasten it with a

(10mm lock nut).

10. Repeat steps for the opposite side.

11. Once all the brackets and bolts are in place, double check everything and fasten all the nuts tight.

12. Place wheels back on the UTV, torque all lugs to factory specifications.