High Lifter Signature Series Kurulum Talimatları Kılavuzu - Sayfa 6

Otomobil Aksesuarları High Lifter Signature Series için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. High Lifter Signature Series 12 sayfaları. Yamaha wolverine 850 x2/x4

Sayfayı Yazdır

1. Place jack under the center of the UTV, just forward of where the rear drive shaft connects to the engine,

and lift until the weight is off the suspension. Be careful to secure the UTV properly so it is stable on the

jack.

2. Remove the rear wheels.

3. Starting on the right side, disconnect the top of the shock from the UTV.

4. Place the rear lift bracket (81J-L) to the outside of the outer shock tab. The lower portion of the bracket

will come to rest to the inside of the lower portion of the frame.

5. Slide a (12mm x 80mm bolt) through the top hole of the lift bracket and through the outer shock mount

tab.

REAR LIFT INSTALLATION