High Lifter YLKWOLVX4-51 설치 지침 매뉴얼 - 페이지 3

{카테고리_이름} High Lifter YLKWOLVX4-51에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. High Lifter YLKWOLVX4-51 12 페이지. Yamaha wolverine 850 x2/x4

*When referring to left and right positions during the installation process, it is from the seated position*

1. Place UTV transmission in park. Place jack under center of UTV front end and lift until front wheels clear

the ground. Be careful to support ATV properly so that it is securely supported so that A-arms and

shocks can droop to full extension. Remove the front wheels.

2. Disconnect the top of the shock from the frame.

3. Next insert the long front lift bracket (73M) into the frame starting from the driver's side of the UTV.

Insert the bracket so that it slides between the shock mount tabs. Also, insert the bracket with the

notched side down and so that it is on the right side of the UTV. The notch is designed to clearance the

bracket from the voltage regulator on the passenger side.

4. Next, insert a (10mm x 70mm bolt) through the small front lift bracket (73N) and outer shock mount.

FRONT LIFT INSTALLATION