High Lifter YLKWOLVX4-51 Handleiding voor installatie-instructies - Pagina 3

Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} High Lifter YLKWOLVX4-51. High Lifter YLKWOLVX4-51 12 pagina's. Yamaha wolverine 850 x2/x4

Pagina afdrukken

*When referring to left and right positions during the installation process, it is from the seated position*

1. Place UTV transmission in park. Place jack under center of UTV front end and lift until front wheels clear

the ground. Be careful to support ATV properly so that it is securely supported so that A-arms and

shocks can droop to full extension. Remove the front wheels.

2. Disconnect the top of the shock from the frame.

3. Next insert the long front lift bracket (73M) into the frame starting from the driver's side of the UTV.

Insert the bracket so that it slides between the shock mount tabs. Also, insert the bracket with the

notched side down and so that it is on the right side of the UTV. The notch is designed to clearance the

bracket from the voltage regulator on the passenger side.

4. Next, insert a (10mm x 70mm bolt) through the small front lift bracket (73N) and outer shock mount.

FRONT LIFT INSTALLATION