High Lifter Arctic Cat Wild Cat Lower Radius Bars 빠른 시작 매뉴얼 - 페이지 5
{카테고리_이름} High Lifter Arctic Cat Wild Cat Lower Radius Bars에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. High Lifter Arctic Cat Wild Cat Lower Radius Bars 7 페이지.
페이지 인쇄
10. Once you have set the distance on the new rod attach it to the UTV. Attach the ends of the radius bars
to the frame using stock hardware. Torque nuts to factory specifications.
NOTE: The grease fitting was added after we did the installation and that is why it is not illustrated in
the photos. Make sure it is pointed out so it can be greased.
11. Connect the new Heim Joint and Spacers to the knuckle assembly using the new shoulder bolt and
10mm lock nut provided in the kit. When you place the spacer on the bolt make sure that the tapered
end goes into the eye of the heim joint. Now insert into the heim joint, and then place another spacer
on the other side of the heim joint, and connect it to the knuckle assembly using the lock nut provided.