High Lifter Arctic Cat Wild Cat Lower Radius Bars Посібник із швидкого старту - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Позашляховик High Lifter Arctic Cat Wild Cat Lower Radius Bars. High Lifter Arctic Cat Wild Cat Lower Radius Bars 7 сторінок.
Друкувати сторінку
10. Once you have set the distance on the new rod attach it to the UTV. Attach the ends of the radius bars
to the frame using stock hardware. Torque nuts to factory specifications.
NOTE: The grease fitting was added after we did the installation and that is why it is not illustrated in
the photos. Make sure it is pointed out so it can be greased.
11. Connect the new Heim Joint and Spacers to the knuckle assembly using the new shoulder bolt and
10mm lock nut provided in the kit. When you place the spacer on the bolt make sure that the tapered
end goes into the eye of the heim joint. Now insert into the heim joint, and then place another spacer
on the other side of the heim joint, and connect it to the knuckle assembly using the lock nut provided.