Autonomic Mirage MMS-1e 설정 매뉴얼 - 페이지 6

{카테고리_이름} Autonomic Mirage MMS-1e에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Autonomic Mirage MMS-1e 18 페이지.

Set Up Your Mirage Media Server

This section provides an overview of powering up your server for the first time and using the

Remote Configuration Utility to configure the device.

NOTE

You must plug everything in and connect all wires before powering up.

We recommend attaching a display when you first power up the server

as the IP address will be on screen.

Once you have made all the necessary connections, turn on the MMS by pressing the power

button on the front of the unit once. You should see that the power LED illuminates.

Wait 2-3 minutes for your server to completely boot up the first time, or if your server is

connected to a video display, wait until the Now Playing screen shows on the display.

For a wiring diagram, please refer to the Mirage Audio System Quick Start Guide on our

website.

Configuring The MMS

The Mirage Media Server has a built-in web server that provides for remote configuration of

the server, control system integration, and control of music playback with the Mirage player

interface.

The MMS is configured at the factory to automatically obtain a network IP address from your

DHCP server (usually your router).

Using any computer on the same network, open the MMS Remote Configuration Utility with

your Internet browser using the default configuration address for your server model:

Using IP:

http://server-ip-address/config

On some computers (especially Macs) you will need to add the

server name (example:

You can look up the IP address of the server using the DHCP client table in your router's

interface if necessary.

Once you have connected to the MMS configuration page, you will see several tabs for

configuring your MMS:

The

Server Settings

It is important to remember to press the Save button at the top of this tab after you are finished

making any changes to this page. If you navigate away from this page without pressing Save,

your changes will be lost.

5 of 15

http://Mirage-1.local/config

tab allows you to configure the following options.

suffix to the end of the

.local

Mirage Media Server Set Up