DCB FT-66 Series 빠른 시작 매뉴얼 - 페이지 4

{카테고리_이름} DCB FT-66 Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DCB FT-66 Series 6 페이지.

FT-66xx Quick Start Guide

Step 9: Tunnel – Generate CA Key

This step will only be performed once. You should not repeat it for each FT device.

A USB flash drive was included with your FT-66xx. Insert the USB flash drive into one of the USB

ports on the FT-66xx. Go to Tunnel – Generate CA Key form. Fill out the form. All of the fields,

except the password fields, are informational. It really doesn't matter what you put in them, but its best

to use information meaningful to you.

The two password fields are the most critical. On this form, you are creating the password. Enter the

same password in both places. Make sure to use a password you can remember. You will need it later

when you generate local keys.

Press the "submit" button, then wait patiently. Key generation can be a slow process. Also, make sure

to read any error messages. USB flash drives sometimes fail to register correctly. Upon error, it may

be necessary to remove the USB drive, wait 5 or so seconds, then reinsert the drive.

If you forget your password, there is no way to recover it. Your only option is to generate new a CA

key, which will overwrite the old one.

Step 10: Tunnel – Generate Local Key

This step will be performed for each FT device. As a reminder, make sure the FT's clock has been set

before proceeding.

Insert the USB flash drive, containing your CA Key, into one of the USB ports on the FT-66xx.

Navigate to the Tunnel – Generate Local Key form. For the name field, use a unique and descriptive

name for the device. For example, the server FT-66xx could be named "Home Office Server" and the

client FT-66xx could be named "Remote Office Client". The lifetime field specifies the number of

days that the key is to be certified. Unless you plan to frequently change your keys, its best to choose a

big number.

For the password field, enter the same password you set when you generated the CA key.

Press the "submit" button, then wait patiently. Key generation is a slow process. Also, make sure to

watch for any error messages. USB flash drives sometimes fail to register correctly. Upon error, it

may be necessary to remove the USB drive, wait 5 or so seconds, then reinsert the drive.

Remove the USB Flash drive and store it in a safe place. You will need it in the future if you plan to

add more client FT-66xx devices to your server.

Step 11: Tunnel – Mode

Navigate to the Tunnel – Mode form and select whether the FT-66xx is operating as the server or the

client.

4/16/2020