Autonumis WRCBS600 사용자 설치 설명서 - 페이지 4

{카테고리_이름} Autonumis WRCBS600에 대한 사용자 설치 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Autonumis WRCBS600 13 페이지. Popular & premier cooler, single integral unit

Controls

The thermostat control is situated inside the cabinet on the back panel.

Refrigeration is switched on and off at the mains supply. The light is controlled

independently by using the toggle switch provided at the front of the unit.

Warning: If the supply cord is damaged, the manufacturer, its service agent or

similarly qualified person must replace it, in order to avoid a hazard.

Electronic Thermostat Control

To set the desired temperature:

Press the

button (the current set temperature is now displayed).

Then press the

Finally press the

more buttons are pressed within 10 seconds then the display will once more

show the current internal temperature of the unit.

Note: Setting the unit at a colder thermostat setting will not make the unit cool

down faster. This unit has been installed with an automatic defrost system to

prevent the build-up of ice on interior panels. In the unlikely event of an ice

build-up; switch off the unit and allow several hours for the ice to melt; w

inside of the unit with an absorbent cloth and dry; then

button to modify the displayed value.

button to store the value and exit the adjustment. If no

restart the unit.

ipe the