Autonumis WRCBS600 User's Installation Manual - Page 4
Browse online or download pdf User's Installation Manual for Freezer Autonumis WRCBS600. Autonumis WRCBS600 13 pages. Popular & premier cooler, single integral unit
Controls
The thermostat control is situated inside the cabinet on the back panel.
Refrigeration is switched on and off at the mains supply. The light is controlled
independently by using the toggle switch provided at the front of the unit.
Warning: If the supply cord is damaged, the manufacturer, its service agent or
similarly qualified person must replace it, in order to avoid a hazard.
Electronic Thermostat Control
To set the desired temperature:
Press the
button (the current set temperature is now displayed).
Then press the
Finally press the
more buttons are pressed within 10 seconds then the display will once more
show the current internal temperature of the unit.
Note: Setting the unit at a colder thermostat setting will not make the unit cool
down faster. This unit has been installed with an automatic defrost system to
prevent the build-up of ice on interior panels. In the unlikely event of an ice
build-up; switch off the unit and allow several hours for the ice to melt; w
inside of the unit with an absorbent cloth and dry; then
or
button to modify the displayed value.
button to store the value and exit the adjustment. If no
restart the unit.
03
ipe the