high pointe EM925AQR 사용 설명서 - 페이지 14

{카테고리_이름} high pointe EM925AQR에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. high pointe EM925AQR 17 페이지.

high pointe EM925AQR 사용 설명서
.
12

DINNER PLATE

a) Press " DINNER PLATE " repeatedly until the number you wish appears in the
display, "9.0", "12.0", "18.0" Oz will display in order.
For example, press "DINNER PLATE" once, " 0" appears.
b) Press " START/+30 SEC. " to cook, buzzer sounds once. When cooking finishes, buzzer
sounds five times and then turn back to waiting state.
13. PIZZA
a) Press " PIZZA " repeatedly until the number you wish appears in the display,
"4.0", "8.0", "14.0" Oz will display in order.
For example, press " PIZZA" once, "4.0" appears.
b) Press " START/+30 SEC. " to cook, buzzer sounds once. When cooking finishes, buzzer
sounds five times and then turn back to waiting state.

14. MEMORY FUNCTION

(1) Press "0/MEMORY" to choose memory 1-3 procedure. The screen will display 1, 2, 3.
(2) If the procedure has been set, press " START/ +30 SEC." to use it. If not, continue to
set the procedure. Only one or two stages can be set.
(3) After finishing the setting, press "START/ +30 SEC." once to save the procedure.
If press " START/ +30 SEC." again, it will start cooking.
Example: To set the following procedure as the second memory, that is memory 2.
To cook the food with 80% microwave power for 3 minutes and 20 seconds.
The steps are as follow:
a. In waiting states, press "0/MEMORY" twice, stop pressing until the screen displays "2".
b.Press "TIME COOK" once, then press "3", "2", "0" in order.
c. Press "POWER" once, "PL10" displays, then press "8" and "PL8" displays.
d. Press "START/ +30 SEC." to save the setting. Buzzer sounds once and the screen will
display "2". If you press "START/+30SEC." again, the procedure will be saved as the
memory 2 and operated.
e. If the electricity is not cut off, the procedure will be saved all the time. If it is, the
procedure need to reset.
f. If you want to run the saved procedure, in waiting state, press "0/MEMORY" twice,
screen displays "2", then press "START/+30SEC." to run.
9.
13