high pointe EM925AQR Instruction Manual - Page 14

Browse online or download pdf Instruction Manual for Microwave Oven high pointe EM925AQR. high pointe EM925AQR 17 pages.

Print Page

DINNER PLATE

a) Press " DINNER PLATE " repeatedly until the number you wish appears in the

display, "9.0", "12.0", "18.0" Oz will display in order.

For example, press "DINNER PLATE" once, " 0" appears.

b) Press " START/+30 SEC. " to cook, buzzer sounds once. When cooking finishes, buzzer

sounds five times and then turn back to waiting state.

13. PIZZA

a) Press " PIZZA " repeatedly until the number you wish appears in the display,

"4.0", "8.0", "14.0" Oz will display in order.

For example, press " PIZZA" once, "4.0" appears.

b) Press " START/+30 SEC. " to cook, buzzer sounds once. When cooking finishes, buzzer

sounds five times and then turn back to waiting state.

(1) Press "0/MEMORY" to choose memory 1-3 procedure. The screen will display 1, 2, 3.

(2) If the procedure has been set, press " START/ +30 SEC." to use it. If not, continue to

set the procedure. Only one or two stages can be set.

(3) After finishing the setting, press "START/ +30 SEC." once to save the procedure.

If press " START/ +30 SEC." again, it will start cooking.

Example: To set the following procedure as the second memory, that is memory 2.

To cook the food with 80% microwave power for 3 minutes and 20 seconds.

The steps are as follow:

a. In waiting states, press "0/MEMORY" twice, stop pressing until the screen displays "2".

b.Press "TIME COOK" once, then press "3", "2", "0" in order.

c. Press "POWER" once, "PL10" displays, then press "8" and "PL8" displays.

d. Press "START/ +30 SEC." to save the setting. Buzzer sounds once and the screen will

display "2". If you press "START/+30SEC." again, the procedure will be saved as the

memory 2 and operated.

e. If the electricity is not cut off, the procedure will be saved all the time. If it is, the

procedure need to reset.

f. If you want to run the saved procedure, in waiting state, press "0/MEMORY" twice,

screen displays "2", then press "START/+30SEC." to run.