agrobrite FLF27DF 사용 설명서 - 페이지 2

{카테고리_이름} agrobrite FLF27DF에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. agrobrite FLF27DF 6 페이지. Standing plant lamp

INSTRUCTION MANUAL

ASSEMBLY INSTRUCTIONS

1. Connect the two ends of the Power Cord (between

the Base and Shaft) using the lock connectors.

2. Carefully tuck excess Power Cord into the Shaft.

WARNING: Do not cut or shorten the power cord.

3. Insert the Gooseneck and the Shaft into the Base.

4. Check direction of the lamp and the hole on the

Base, then use a Phillips Head Screwdriver (not

included) to tighten the screw into the hole.

CAUTION: BE CAREFUL NOT TO PINCH ANY PART

OF THE CORD BETWEEN METAL PIECES.

BULB INSTALLATION

1. Unplug lamp from power source

2. Firmly hold base (B) and push bulb (C) into the

socket (A).

3. Be sure bulb is firmly seated in the socket (see

below) and snapped into the metal bulb clip (D).

1. Unplug lamp from power source.

2. Firmly hold base (B) and pull bulb (C) from the

socket (A) in an outward motion.

CAUTION: ALWAYS UNPLUG LAMP BEFORE

PERFORMING BULB REPLACEMENT OR INSTALLATION