agrobrite FLF27DF Gebruiksaanwijzing - Pagina 2

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} agrobrite FLF27DF. agrobrite FLF27DF 6 pagina's. Standing plant lamp

agrobrite FLF27DF Gebruiksaanwijzing
INSTRUCTION MANUAL
2
ASSEMBLY INSTRUCTIONS
1. Connect the two ends of the Power Cord (between
the Base and Shaft) using the lock connectors.
2. Carefully tuck excess Power Cord into the Shaft.
WARNING: Do not cut or shorten the power cord.
3. Insert the Gooseneck and the Shaft into the Base.
4. Check direction of the lamp and the hole on the
Base, then use a Phillips Head Screwdriver (not
included) to tighten the screw into the hole.
CAUTION: BE CAREFUL NOT TO PINCH ANY PART
OF THE CORD BETWEEN METAL PIECES.

BULB INSTALLATION

1. Unplug lamp from power source
2. Firmly hold base (B) and push bulb (C) into the
socket (A).
3. Be sure bulb is firmly seated in the socket (see
below) and snapped into the metal bulb clip (D).

BULB REMOVAL

1. Unplug lamp from power source.
2. Firmly hold base (B) and pull bulb (C) from the
socket (A) in an outward motion.
CAUTION: ALWAYS UNPLUG LAMP BEFORE
PERFORMING BULB REPLACEMENT OR INSTALLATION
www.hydrofarm.com