Dynascan R-58 매뉴얼 - 페이지 6

{카테고리_이름} Dynascan R-58에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynascan R-58 15 페이지.

Priority scan

High/Lower power

Scrambler

VOX

Menu function

Received signal strength and TX power

Frequency display

Turn on and off the power/ Adjusting volume

If you want to turn on the power, rotate the PWR/VOL knob clockwise until a beep

sound is heard .All icons and frequencies appeared on the screen. You can adjust your

desired volume by turning the knob.

To turn off the power, rotate the PWR/VOL knob counter-clockwise rotation. All the

icons on the display will disappear and the radio is off.

After turning on the radio, rotate the PWR/VOL knob clockwise to increase the

volume and counter-clockwise to decrease.

MONITOR

Press and hold the defined side key 3 or 4, and with the PWR / VOL control knob to

hear the background noise of the channel and adjust the voice to comfortable degree,

you can directly listen to the sound without having to wait for your call. To turn off

the squelch release the side key.

Transmitting

Press the [PTT] key, and then facing the front of the radio microphone to speak.

Press and hold [PTT] key LED is red for the period.

If you rely on the microphone too close or too loudly may increase distortion and

reduce your signal in the receiver's clarity. Release [PTT] key received signal in order

to listen to the partner's speech.

● Mode Selection

By pc software you can program three modes: frequency mode; PMR; PMR + LPD.

Press and hold the ENT key while turn on the power, you can switch it between

frequency mode and channel mode

In frequency mode, short press VFO / MR key to switch between frequency mode

and channel+frequency mode.

In the PMR + LPD mode, long press [MENU] button for 4 seconds to switch it

between PMR channel and LPD channel.