Dynascan R-58 매뉴얼 - 페이지 7

{카테고리_이름} Dynascan R-58에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynascan R-58 15 페이지.

● Storage channel

In frequency mode, select the frequency and other parameters (such as CTCSS, DCS,

repeater shift, etc.). Click [FUN] key and then press [VFO / MR] key, the screen

displays "F" icon and the channel number flashing in the upper right corner ( If the

channel has already stored frequency, then the channel number will not flashing), use

the rotary encoder to select the channel you wanted, press the [VFO / MR] key to

complete the channel storage and returns to the frequency mode.

Delete a momory

1.Delete one store channel

In channel mode turn off the power.

Hold down the VFO/MR key and turn on the unit. "DEL001?" and stored channel

number will be displayed. Turn the Encoder knob or select the channel to delete.

Push ENT until "YES? 001" appears on the display; push it again to confirm. If you

don't want to delete it, just press VFO/MR.

2. Reset (Delete all the settings in Frequency mode)

Hold down the FUN key and turn on the unit until "RESET?" is displayed. Press

ENTER until "VFO?" is shown on the display; push it again for confirmation.

3. Delete all settings (Delete the settings in both frequency and channel mode)

Hold down FUN key and turn on the unit until display "RESET?", press ENT until

display "VFO?". Turn the Encoder knob to select "FULL?", then press ENT to

delete all the settings in Frequency and VFO mode.

FM RADIO function

This radio has a FM radio function, click [FUN] key screen displays "F" icon, then

press the side key 3 to enter or exit the FM radio feature.

● on-site alarm

Press the emergency call button, radio sounds alarm tone, while sending the alarm

tone and ANI personal identification code to your partner, press [PTT] key to cancel

the alarm.

● Busy Lockout

This feature prevents interference with other radio in this channel,

dealer can use pc software to set, it provides the following two options:

◆ Carrier: When the radio receiving signal, not transmitted.

◆ CTCSS tone: When the radio receives a signal, if it receives the same