Autool BT70 사용자 설명서 - 페이지 3

{카테고리_이름} Autool BT70에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Autool BT70 12 페이지. Battery capacity tester

Brief Introduction

The BT70 is a battery tester tool for testing the performance of start-up lead-acid

batteries. The device uses a large-screen LCD display, and the test process and

results can be displayed through sound alarms and icons. The internal protec-

tion of the device has been strengthened to prevent it from reverse polarity

connection, high voltage access and poor test clamp contact, which ensure

more security and convenience in the operation.

This manual includes instructions for using the instrument and warnings for safe

operation and how to maintain it. Please use the battery tester device strictly

according to the manual. This device strictly complies with GB4793. l Safety

requirements for electronic measuring instruments and IEC/EN61010-1 safety

standards for design and production.

● This product is suitable for the detection of 12V and 24V car batteries.

● The working voltage range is 8 volts to 30 volts with direct current (DC).

● When the battery is in just fully charged state, the voltage will be slightly

higher than the normal value. Please turn on the headlights for 2~3 minutes and

wait for the voltage to drop back to normal before testing.

● Before use, check whether the insulating layer of the test clamps is intact,

damaged, exposed, or disconnected. It is strictly prohibited to use the back

cover before it is closed, otherwise, there is a danger of electric shock.

● Do not use or store the device in harsh environments such as high tempera-

ture, high humidity, flammable, explosive, and strong electromagnetic fields.

● Do not change the internal wiring of the device at will to avoid damage to

the meter.

● If the car engine is running, do not put the equipment and accessories next

to the engine or exhaust pipe to avoid damage by high temperature.

Product icons and Description

Description of icons and test clamps:

● Voltage display: