Autool BT70 사용자 설명서 - 페이지 5

{카테고리_이름} Autool BT70에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Autool BT70 12 페이지. Battery capacity tester

Example display of 24V battery :

Installation instruction

After confirming that the car battery is in normal condition, please install it in the

following order.

● Simply connect the red clamp to the positive of the battery, and the black

clamp to the negative of the battery, then the battery tester device is connected

with the car battery. Pay attention to ensure good contact, so as not to affect the

test results.

● After the connection is completed, the battery tester will automatically detect

and identify the 12v or 24v battery voltage type, and its voltage value and

battery status will be displayed on the LCD screen.

● The principle process of this product is:

After power on, the buzzer will beep once, and the 12v/24v battery will be

automatically detected and displayed. The indicator lamp lights up one after

another and the voltage is detected after three cycles of operation, and the

battery status is judged. After the test is completed, the buzzer beeps once, and

the LCD screen displays the voltage value and battery status.

※Precautions※

● If the voltage reading is greater than 15.0V (for a 24V system, the reading is

greater than 30.0V), please check if there is a problem with the voltage regula-

tor.

● If the voltage reading is less than 13.3V (for a 24V system, the reading is

less than 26.6V), please check the connection, wires, and generators.

● If the voltage reading is less than 12.8V (for a 24V system, the reading is

less than 25.6 V), please check whether the generator belt is worn out and the