Autool CT500 사용자 설명서 - 페이지 3

{카테고리_이름} Autool CT500에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Autool CT500 17 페이지. Gdi fuel injector cleaner & tester

CAUTIONS

Before using the instrument, please read this manual careful-

ly for proper operation.

Since the test device is part of quartz glass, it is easy to break,

so do not place other objects around the equipment to avoid

bumping and breaking.

If there is no digital display after power on, please check

whether the power supply is powered; if so, check whether the

plug is connected firmly, or whether the fuse is blown. If it is not

broken, and the switch is still invalid after pressing the switch

several times intermittently, please contact the manufacturer

and must not disassemble it by yourself, otherwise our compa-

ny will not provide warranty.

When no cleaning agent is added to the ultrasonic tank, it is

strictly prohibited to open the ultrasonic cleaning item to avoid

damage to the ultrasonic system.

Every time the test solution is changed, it must be cleaned up,

and then 1L of new test solution should be added.

The use of unqualified testing agent will cause corrosion of the

oil pump, oil supply pipeline and failure of the pressure gauge.

Using other cleaning agent and testing agent will cause the

equipment surface coating to peel off.

It is strictly forbidden to use kerosene, gasoline or other testing

agent and cleaning agents as testing agent and cleaning

agents for this machine. Otherwise, the "O" ring and pipeline

rubber parts in the equipment will be damaged, causing

leakage.

The cleaning agent and testing agent should not be mixed up.