ACTON R10 ROCKETSKATES 소유자 매뉴얼 - 페이지 8

{카테고리_이름} ACTON R10 ROCKETSKATES에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ACTON R10 ROCKETSKATES 12 페이지. Smart electric skates
ACTON R10 ROCKETSKATES에 대해서도 마찬가지입니다: 소유자 매뉴얼 (13 페이지)

페이지 인쇄

Changing the Footpad

The RocketSkates™ comes with a long footpad installed. This should fit shoe sizes

Women US 6, UK 4 and larger. Men US 6.5, UK 39 and larger. If your shoes size is

smaller, you have the option of swapping the footpad to a shorter one.

Use the attached wrench to remove

both screws on the footpad. Remove

the screws, nuts and washers.

B. Charging

Warning: For safety, please turn off the skates while charging.

Failure to recharge the battery at least once two months may result in an excessively

degraded battery performance. The battery requires charging for at least 2 hours

before first use.

The charging port is at the top center

section of the ankle cushion. Plug into

this port first, then plug the charger into

the wall outlet.

C. Register & Setup

RocketSkates™ can be connected with app through Bluetooth. Please download the

app "ROCKETSKATES" to your phone. Currently we only offer the app for Android

4.3+ and iOS iPhone 5+. When the app is opened for the first time, the registration

process will help you through some features that allow the RocketSkates™ to suit

you better and therefore enhance the your first experience. These features include an

adaptable motor performance for different weight and height. Please provide accurate

information at setup. For your safety, please set to BEGINNER mode on the app home

page to start with. Only set to NORMAL mode when you are a comfortable rider. Only

set to PRO mode when you are very familiar with the RocketSkates™.

Slide the new footpad on and put

the washers and nuts back and tighten

both screws.

During charging, the red light on

the charger should be on. Once the

RocketSkates™ are fully charged, the

light on the charger will turn green.