ACTON R10 ROCKETSKATES 소유자 매뉴얼 - 페이지 9

{카테고리_이름} ACTON R10 ROCKETSKATES에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ACTON R10 ROCKETSKATES 12 페이지. Smart electric skates
ACTON R10 ROCKETSKATES에 대해서도 마찬가지입니다: 소유자 매뉴얼 (13 페이지)

페이지 인쇄

D. Riding

Warning: Wear all suggested protective gears first including a helmet, ankle pads and

knee pads. Check that the power is off and sit down in a secure location. Firmly strap-

in the skates over your shoes. Make sure the Lead skate is on the foot that is most

comfortable for you to control.

Turn the power on by pressing the

hexagonal button at the rear end of the

skates. A brief music will be played and

the battery level LED will turn on. The

RocketSkates™ should be in brake mode.

Before kick-to-start, practice skating

with the RocketSkates turned off. To begin

skating, kick-off with one foot and let both

skates move with the momentum. You will

then feel the motors kick in.

If you need to pause while riding the RocketSkates™, push the heel of the Lead skates

down firmly until the RocketSkates™ have come to a complete stop for at least one

second. You are now able to lift your heel and walk on your toes. To begin riding again,

kick-off and repeat step 3.

When you finish riding, stop, sit down and turn the RocketSkates™ off before you

release the buckle.

Carefully stand up with toes of both

feet on the ground. Lean slightly forward

to avoid falling backward. Push the heel

of the lead foot firmly down to initiate.

DO NOT SKIP THIS STEP. The brake will

be released and the skates should start

moving freely.

To speed up, tilt the lead skate

forward. To slow down or brake, push the

heel of the Lead skate down. The Follower

skate will carry the same speed and brake

regardless of heel position.