Emerson DIXELL XWEB1000D PRO 설치 및 운영 지침 - 페이지 17

{카테고리_이름} Emerson DIXELL XWEB1000D PRO에 대한 설치 및 운영 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Emerson DIXELL XWEB1000D PRO 19 페이지.
Emerson DIXELL XWEB1000D PRO에 대해서도 마찬가지입니다: 설치 및 운영 지침 (20 페이지)

페이지 인쇄

CLEANOUT

The procedure allows to restore the XWEB to the factory parameters; it is useful in cases where the IP

address and / or port of the web service and / or login credentials (username / password) have been lost and

/ or in the presence of generic errors.

Function activated by pressing the button for a long time.

While the button remains pressed, the Cleanout procedure starts.

The progress of the procedure is intuitive thanks to the flashing of the LEDs:

1. Press the button

2. The two LEDs flash for ~ 5 seconds (Green)

3. The two LEDs remain steady for ~ 1 second (Green)

4. The two LEDs turn OFF

5. Release the button

6. The Cleanout starts and a reboot is triggered.

Throughout the procedure, then pressing the button takes about 6~7 seconds.

When restarting, you will find the Wizard active and System Settings preserved.

OPERATIVE PROCEDURES

For the operating procedures please refer to the OPERATING MANUAL, in the "Download Manuals" section

of the website

http://www.dixell.com

1592010930 XWEB1000D PRO STP GB r1.0 25.11.2020.doc

where the updated version is available.

XWEB1000D PRO

17/19