High Tech Pet Armor Flex 설치 매뉴얼 - 페이지 8

{카테고리_이름} High Tech Pet Armor Flex에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. High Tech Pet Armor Flex 16 페이지. Low-e patio pet door

STEP 9: Loosen the Top Slider set screws

Loosen the Top Slider locking set screws on the left and right

sides of the Top Panel Assembly using the 1/8" Allen wrench

provided. If the Top Slider does not immediately release, push it

up by hand so that it slides to its highest position.

Fig 9

STEP 10: Insert the patio pet door into your sliding glass door track

Fig 10A

Fig 10C

Fig 10B

Make sure the lock holes in the Top Frame Assembly are facing the inside of your home. Position the pet

door assembly into your sliding glass door frame by first inserting the pet door Bottom Panel into the

bottom of your door track so that the Simi-circular groves in the pet door Bottom Panel are placed over

the sliding rail at the base of your sliding glass door track (Fig 10A). Tilt the pet door assembly up. (Fig

10B). pull down on the Top Slider. Insert the Top Slider into the top of your door track and release,

allowing it to move up into the top of the track.

STEP 11: Install a House Lock Tab on the

Top Panel Assembly

Install a House Lock Tab on the wall side of the pet door

by screwing (2) #6 X ½" round head sheet metal screws

into the pre-drilled holes on the pet door. Position the

Tab with the open end pointing downward as shown.

Fig 11