Dynastream Innovations SDM2 매뉴얼 - 페이지 2

{카테고리_이름} Dynastream Innovations SDM2에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynastream Innovations SDM2 4 페이지. Wireless speed and distance monitor

EPLACING THE

SDM2 S

PEED AND

Your SDM2 Speed and Distance Monitor uses one AAA battery, which is estimated to last 65-70 hours.

Power off the pod after running to lengthen battery life. The battery hatch is located on the front flat end

of the monitor and can be opened with a coin. Select a coin that fits the slot on the battery door. Insert the

coin into the slot and, applying firm downward pressure, turn the coin counterclockwise to open and

remove the battery door. Insert the battery with the positive end first. Replace the battery door. Insert the

coin into the slot and, applying firm downward pressure, turn the coin clockwise to close.

PECIFICATIONS

Size (max dimensions):

Weight:

Sensors:

Power:

Battery life:

Storage temp:

Operating temp:

Water resistance:

User-interface:

Speed-distance computation:

Available data and accuracy:

Speed range:

RF frequency/protocol:

Communication range:

Regulatory compliance:

ATTERY ON YOUR

ISTANCE

73 (L) x 41 (W) x 25 (H) mm

40 g

Dynastream SpeedMax sensor

Single user-replaceable AAA battery

Minimum 65-70 hours run time at 20°C when used as a running pod;

up to 2 weeks as an activity monitor

-20°C to +70°C

-10°C to +50°C

3 ATM for 24 hours

Wireless sports monitoring watches and other ANT-enabled

data-receiving products

Dynastream patented SpeedMax algorithms

Speed and distance – uncalibrated >97%, calibrated >99%

1.0-5.5 m/s (2.2-12.3 mph)

2.4 GHz / Dynastream ANT transmit protocol

> 3 m (receiver dependent)

FCC, IC, and CE

ONITOR

6/6/2006