Dynastream Innovations SDM2 Manual - Page 2

Browse online or download pdf Manual for GPS Dynastream Innovations SDM2. Dynastream Innovations SDM2 4 pages. Wireless speed and distance monitor

R
EPLACING THE
SDM2 S
PEED AND
Your SDM2 Speed and Distance Monitor uses one AAA battery, which is estimated to last 65-70 hours.
Power off the pod after running to lengthen battery life. The battery hatch is located on the front flat end
of the monitor and can be opened with a coin. Select a coin that fits the slot on the battery door. Insert the
coin into the slot and, applying firm downward pressure, turn the coin counterclockwise to open and
remove the battery door. Insert the battery with the positive end first. Replace the battery door. Insert the
coin into the slot and, applying firm downward pressure, turn the coin clockwise to close.
S
PECIFICATIONS
Size (max dimensions):
Weight:
Sensors:
Power:
Battery life:
Storage temp:
Operating temp:
Water resistance:
User-interface:
Speed-distance computation:
Available data and accuracy:
Speed range:
RF frequency/protocol:
Communication range:
Regulatory compliance:
Preliminary document not for redistribution. Product features and specifications may vary. Copyright ©2005 Dynastream Innovations Inc.
B
ATTERY ON YOUR
D
M
ISTANCE
73 (L) x 41 (W) x 25 (H) mm
40 g
Dynastream SpeedMax sensor
Single user-replaceable AAA battery
Minimum 65-70 hours run time at 20°C when used as a running pod;
up to 2 weeks as an activity monitor
-20°C to +70°C
-10°C to +50°C
3 ATM for 24 hours
Wireless sports monitoring watches and other ANT-enabled
data-receiving products
Dynastream patented SpeedMax algorithms
Speed and distance – uncalibrated >97%, calibrated >99%
1.0-5.5 m/s (2.2-12.3 mph)
2.4 GHz / Dynastream ANT transmit protocol
> 3 m (receiver dependent)
FCC, IC, and CE
ONITOR
6/6/2006
2