DCI Edge SERIES 5 설치 지침 매뉴얼 - 페이지 9

{카테고리_이름} DCI Edge SERIES 5에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DCI Edge SERIES 5 13 페이지. Side delivery system
DCI Edge SERIES 5에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (12 페이지), 설치 지침 매뉴얼 (11 페이지), 사용 설명서 지침 (8 페이지), 설치 지침 매뉴얼 (14 페이지), 사용 설명서 지침 (19 페이지)

페이지 인쇄
DCI Edge SERIES 5 설치 지침 매뉴얼
ADJUSTING THE CHAIR POSITION SOFT LIMITS
PROGRAMMING SOFT LIIMITS
Soft Limits are the software controlled position limits for the hydraulic chair movements. These can be programmed
using the foot switch or any touchpad that controls chair movement. Soft limits are factory set and should only be
adjusted by a technician.
Enter Soft Limit Mode: While holding the "Return" key, press and hold the "Preset 1" key for 6 seconds. Two short
1
beeps followed by one long beep indicate that you have entered Soft Limit Mode. While in Soft Limit Mode, the chair
will be able to move through its full mechanical range of travel.
Position the chair: Press a directional key (up, down, recline, incline) to position the chair at its desired soft limit
2
position.
Set soft limits: While pressing and holding the "Return" key, press the directional key (up, down, recline, incline)
3
for the direction that you want to limit. Two long audible beeps will indicate successful programming of that soft
limit. Example: To set the lower limit of chair height, press and hold the Return key and the Chair Down arrow
key.
Exit Soft Limit Mode: while holding the "Return" key, press and hold the "Preset 1" key for 6 seconds. Three
4
audible beeps indicate that you have left Soft Limit Mode. Once exited, the chair will operate within the
movement constraints that have been programmed.
If, while in Soft Limit Mode, no keys are pressed for over 60 seconds, the chair will automatically exit Soft Limit Mode,
at which time three audible beeps will sound. Once exited, the chair will operate within the movement constraints
that have been programmed.
CHAIR
UPPER LIMIT
BACKREST
RECLINE LIMIT
CHAIR
LOWER LIMIT
RETURN
PRESET 1
BACKREST
INCLINE LIMIT
SERIES 5 DENTAL CHAIR
Installation Instructions
9