Autopilot REVOLVE F20 사용자 설명서 - 페이지 9

{카테고리_이름} Autopilot REVOLVE F20에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Autopilot REVOLVE F20 12 페이지. Repeat cycle and light combo timer

1. Save the instructions. These safety and operating instructions must be kept in a safe place for

future reference.

2. Heed all warnings. All warnings on this product and in the instructions must be observed

closely.

3. Follow all instructions. All operating instructions must be followed.

4. If the instructions as provided by the manufacturer are not followed, damage to the product

itself may result.

5. Install your controller at least eight feet away from any devices that produce large amounts of

electronic noise, such as electronic ballasts or ozone generators.

6. Do not exceed the maximum power rating (120V/14.5A in) and do not plug in a device/devices

requiring more than the max output current (14.5A).

7. Insert only NEMA 1-15P and NEMA 5-15P plugs into the receptacle on this device. Do not insert

any other type of plug into it.

8. Do not use this controller near water. It is neither waterproof nor shockproof.

9. Do not use the device near any heat source.

10. This product is a Safety Class I Controller. Its main plug should only be inserted into power

outlets that are properly grounded.

If a sulfur vaporizer is used, first remove the remote sensor unit from the affected area or turn

the controller off and cover the remote sensor probe with a protective plastic bag. Remove

the bag before turning the power back on. Failure to protect the sensor while using a sulfur

vaporizer will result in damage to its infrared component and will void the warranty.

GENERAL WARNINGS

8' (2.5 m)

minimum

SULFUR VAPORIZER WARNING