Autopilot REVOLVE F20 Manual do utilizador - Página 9
Procurar online ou descarregar pdf Manual do utilizador para Controlador Autopilot REVOLVE F20. Autopilot REVOLVE F20 12 páginas. Repeat cycle and light combo timer
Imprimir página1. Save the instructions. These safety and operating instructions must be kept in a safe place for
future reference.
2. Heed all warnings. All warnings on this product and in the instructions must be observed
closely.
3. Follow all instructions. All operating instructions must be followed.
4. If the instructions as provided by the manufacturer are not followed, damage to the product
itself may result.
5. Install your controller at least eight feet away from any devices that produce large amounts of
electronic noise, such as electronic ballasts or ozone generators.
6. Do not exceed the maximum power rating (120V/14.5A in) and do not plug in a device/devices
requiring more than the max output current (14.5A).
7. Insert only NEMA 1-15P and NEMA 5-15P plugs into the receptacle on this device. Do not insert
any other type of plug into it.
8. Do not use this controller near water. It is neither waterproof nor shockproof.
9. Do not use the device near any heat source.
10. This product is a Safety Class I Controller. Its main plug should only be inserted into power
outlets that are properly grounded.
If a sulfur vaporizer is used, first remove the remote sensor unit from the affected area or turn
the controller off and cover the remote sensor probe with a protective plastic bag. Remove
the bag before turning the power back on. Failure to protect the sensor while using a sulfur
vaporizer will result in damage to its infrared component and will void the warranty.
GENERAL WARNINGS
8' (2.5 m)
minimum
SULFUR VAPORIZER WARNING
9