Dynasty Fireplaces Cascade DY-BTX74 설치 지침 및 운영 매뉴얼 - 페이지 11
{카테고리_이름} Dynasty Fireplaces Cascade DY-BTX74에 대한 설치 지침 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynasty Fireplaces Cascade DY-BTX74 16 페이지. Linear smart electric fireplace
Dynasty Fireplaces Cascade DY-BTX74에 대해서도 마찬가지입니다: 설치 매뉴얼 (9 페이지)
페이지 인쇄
This appliance can be operated by remote control and onboard buttons, however
onboard buttons have limited functions. A beep should be heard when the power is
first applied.
1. ONBOARD BUTTONS
The onboard buttons are located under the trim on the top left.
Heater
Press the Flame button to turn on/off the flame LED and cycle through flame
brightness levels High/Medium/Low.
Press the Heater button to turn on/off the heater and cycle through heat levels
High/Low. Heat level is indicated by the Heater Indicator light.
Red Indicator: High heat
Blue Indicator: Low heat
Indicator Off: Heater off
2. WIFI CONFIGURATION
With the fireplace turned off (flame off, heater off) and supplied with
power, press and hold the Heater button for 5 seconds, then release. The
WiFi Indicator will begin flashing indicating the fireplace is ready for setup
in the Dynasty App.
The WiFi Indicator will remain on once connection to the app is successful.
For more information on WiFi setup, and connecting to voice-assistants
visit: support.dynastyfireplaces.com
OPERATION
Flame
Heater Indicator
WiFi Indicator
Timer
Indicator On: Heater timer is set
- 11 -