Dynasty Fireplaces Cascade DY-BTX74 Installatie-instructies en bedieningshandleiding - Pagina 11
Blader online of download pdf Installatie-instructies en bedieningshandleiding voor {categorie_naam} Dynasty Fireplaces Cascade DY-BTX74. Dynasty Fireplaces Cascade DY-BTX74 16 pagina's. Linear smart electric fireplace
Ook voor Dynasty Fireplaces Cascade DY-BTX74: Installatiehandleiding (9 pagina's)
Pagina afdrukken
This appliance can be operated by remote control and onboard buttons, however
onboard buttons have limited functions. A beep should be heard when the power is
first applied.
1. ONBOARD BUTTONS
The onboard buttons are located under the trim on the top left.
Heater
Press the Flame button to turn on/off the flame LED and cycle through flame
brightness levels High/Medium/Low.
Press the Heater button to turn on/off the heater and cycle through heat levels
High/Low. Heat level is indicated by the Heater Indicator light.
Red Indicator: High heat
Blue Indicator: Low heat
Indicator Off: Heater off
2. WIFI CONFIGURATION
With the fireplace turned off (flame off, heater off) and supplied with
power, press and hold the Heater button for 5 seconds, then release. The
WiFi Indicator will begin flashing indicating the fireplace is ready for setup
in the Dynasty App.
The WiFi Indicator will remain on once connection to the app is successful.
For more information on WiFi setup, and connecting to voice-assistants
visit: support.dynastyfireplaces.com
OPERATION
Flame
Heater Indicator
WiFi Indicator
Timer
Indicator On: Heater timer is set
- 11 -