Highendled YLC-004 지침 - 페이지 3

{카테고리_이름} Highendled YLC-004에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Highendled YLC-004 5 페이지. Dmx multi function controller

Press "UP" or "DOWN" to adjust the flash frequency.

Operation by IR remote

Press "SELECT PROG" to select ROLL mode.

Press "SPEED", adjust the speed via "+" or "-"

Press "FLASH", adjust the flash frequency via "+" or "-".

Press "FLASH" again or other keys, then exit "FLASH"

3, Auto run mode:

Operation by DMX Multi function controller

Press "MODE" to select "AUTO" mode.

Press "SET UP" to select "SPEED", "FLASH" or "FADE".

Press "UP" or "DOWN" to adjust the running speed (00-Full 100).

Press "UP" or "DOWN" to adjust the flash frequency (00-99).

Press "UP" or "DOWN" to adjust the fading time.

Operation by IR remote

Press "AUTO RUN" to select AUTO mode.

Press "SPEED", adjust the speed via "+" or "-"

Press "FLASH", adjust the flash frequency via "+" or "-".

Press "FLASH" again or other keys, then exit "FLASH"

4, SLAVE MODE

Operation by DMX Multi function controller

Press "MODE" to select SLAVE mode, then you can go on the further operation.

Operation by IR remote

Press "SLAVE" to select SLAVE mode, then you can go on the further operation.

5, DMX MODE

Operation by DMX Multi function controller

Press "MODE" to select DMX mode.

Press "SET UP" to select DMX Address setting or DMX running mode "P1" or

"P2"

Press "UP" or "DOWN" to set the DMX value (000-512).

Press "UP" or "DOWN" to select DMX P1 mode or DMX P2 mode.

Operation by IR remote

Press "DMX" to run DMX mode.