Highendled YLC-004 Instructions - Page 3

Browse online or download pdf Instructions for Controller Highendled YLC-004. Highendled YLC-004 5 pages. Dmx multi function controller

Print Page

Press "UP" or "DOWN" to adjust the flash frequency.

Operation by IR remote

Press "SELECT PROG" to select ROLL mode.

Press "SPEED", adjust the speed via "+" or "-"

Press "FLASH", adjust the flash frequency via "+" or "-".

Press "FLASH" again or other keys, then exit "FLASH"

3, Auto run mode:

Operation by DMX Multi function controller

Press "MODE" to select "AUTO" mode.

Press "SET UP" to select "SPEED", "FLASH" or "FADE".

Press "UP" or "DOWN" to adjust the running speed (00-Full 100).

Press "UP" or "DOWN" to adjust the flash frequency (00-99).

Press "UP" or "DOWN" to adjust the fading time.

Operation by IR remote

Press "AUTO RUN" to select AUTO mode.

Press "SPEED", adjust the speed via "+" or "-"

Press "FLASH", adjust the flash frequency via "+" or "-".

Press "FLASH" again or other keys, then exit "FLASH"

4, SLAVE MODE

Operation by DMX Multi function controller

Press "MODE" to select SLAVE mode, then you can go on the further operation.

Operation by IR remote

Press "SLAVE" to select SLAVE mode, then you can go on the further operation.

5, DMX MODE

Operation by DMX Multi function controller

Press "MODE" to select DMX mode.

Press "SET UP" to select DMX Address setting or DMX running mode "P1" or

"P2"

Press "UP" or "DOWN" to set the DMX value (000-512).

Press "UP" or "DOWN" to select DMX P1 mode or DMX P2 mode.

Operation by IR remote

Press "DMX" to run DMX mode.