GalileoSky 4.0 사용자 설명서 - 페이지 6

{카테고리_이름} GalileoSky 4.0에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. GalileoSky 4.0 13 페이지. Rs232, rs485

RS232, RS485. Connection and Operation of Galileosky Photo Camera

(version 3 dated from August 8, 2018)

- go to tab Device in the Configurator and reset the tracking unit by clicking button

"Reset device" or in the Command tab send command "reset".

Check if the tracking unit works with the camera correctly:

- go to tab Commands of Configurator service program and send command

"makephoto";

- go to tab "Troubleshooting" and tick the option "RS232[0]".

The example of troubleshooting message for firmware up to 229 is presented below:

RS232[0].cam. Snapshot start.

RS232[0].cam. ImageSize = 28160.

RS232[0].cam. Pic/RS0/20131025/043925.jpg created successfully.

RS232[0].cam. rx pic.

- check LED of the camera – green LED on the camera blinks rarely (1 time per second)

when in standby mode and quickly (up to 10 times per second) during picture

recording.

5. Visually estimate the quality of the picture in the Device tab of Configuratoe

software (Pic. 4)

Pic. 4

Picture checking in the

Configurator