Dynatech PR-2500-UD Series 사용 설명서 지침 - 페이지 8

{카테고리_이름} Dynatech PR-2500-UD Series에 대한 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynatech PR-2500-UD Series 11 페이지. Progressive safety gear
Dynatech PR-2500-UD Series에 대해서도 마찬가지입니다: 사용 지침 및 유지 관리 매뉴얼 (19 페이지)

페이지 인쇄

1. Series Asg-XXX Ud/ Asg-XXX

INSTRUCTIONS: REPLACEMENT/SAFETY GEAR; Code: DYN 32.03.00

Date: 29/06/2016

Revision: 00

3. Unscrew the DIN 912 M6 screws from the shoe according to Figure7.

4. Replace the shoe for one of the appropriate thickness.

5. Replace the screws, according to the assembled shoe thickness.

⚠

For these safety gear models, adapting the shoe thickness to the guide rail centre is done via

the block. If the shoe replacement is not the same type, they will not fit together. The hole

measurements to the guide rail centres that appear in the usage and maintenance instructions

will not be valid for this replacement. These measurements may vary by several millimetres,

depending on the shoes.

Figure6 Safety gear PR-2500 UD V50/ PQ-3400 UD

Shoe thickness

M6x25 DIN 912 8.8

7-8-9-10-11

M6x22 DIN 912 8.8

12-13-14

M6x20 DIN 912 8.8

15-15,88-16

Screw type