Afinia L801 사용 설명서 - 페이지 3

{카테고리_이름} Afinia L801에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Afinia L801 6 페이지. Rewinder
Afinia L801에 대해서도 마찬가지입니다: 빠른 설정 및 설치 매뉴얼 (8 페이지)

6. Start a roll to roll print job on the L801 printer. After about 3 feet of stock has been printed, pause the printer

by pressing the pause button on the front panel.

7. Wind the stock under the dancer arm and tape it to the front of the empty core on the rewinder.

8. Manually rewind the stock onto the core.

9. Apply power to the rewinder. The stock will now be tight.

10. Press the Resume button on the printer front panel to resume the print job.

11. The stock will now be rewound onto the core as it is printed.

12. Loosen the thumb screws and move the rewinder base to align the rewinder with the printer, if necessary.

13. If there is any slippage when the printer performs a mid job servicing, loosen the tension on the adjustable

spring by turning the dial clockwise. If the roll is not rewinding tightly, increase the tension on the adjustable

spring by turning the dial counter clockwise. NOTE: Smaller stock widths (2" to 4") require less tension. Wider

stocks (6" to 8.5") typically require more tension.