Afinia L801 Kullanım Talimatları Kılavuzu - Sayfa 3
Yazıcı Aksesuarları Afinia L801 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Afinia L801 6 sayfaları. Rewinder
Ayrıca Afinia L801 için: Hızlı Kurulum ve Kurulum Kılavuzu (8 sayfalar)
Sayfayı Yazdır6. Start a roll to roll print job on the L801 printer. After about 3 feet of stock has been printed, pause the printer
by pressing the pause button on the front panel.
7. Wind the stock under the dancer arm and tape it to the front of the empty core on the rewinder.
8. Manually rewind the stock onto the core.
9. Apply power to the rewinder. The stock will now be tight.
10. Press the Resume button on the printer front panel to resume the print job.
11. The stock will now be rewound onto the core as it is printed.
12. Loosen the thumb screws and move the rewinder base to align the rewinder with the printer, if necessary.
13. If there is any slippage when the printer performs a mid job servicing, loosen the tension on the adjustable
spring by turning the dial clockwise. If the roll is not rewinding tightly, increase the tension on the adjustable
spring by turning the dial counter clockwise. NOTE: Smaller stock widths (2" to 4") require less tension. Wider
stocks (6" to 8.5") typically require more tension.