Highland heat Kompakt 16 사용자 설명서 - 페이지 11

{카테고리_이름} Highland heat Kompakt 16에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Highland heat Kompakt 16 20 페이지. Solid fuel boiler

Kompakt

4. Boiler installation

4.6 Changing the door direction

1. Screw DIN 912 M10x16

2. Screw DIN 912 M10x12

3. Eccentric M10

The direction of the upper and middle doors is changed by

turning the door together with the hinge (hinges) away from the

boiler body and screwing it on the opposite side of the boiler.

The door handle is unscrewed, turned over and screwed back.

The direction of the lower door is changed by turning the door

away from the hinge. The hinge is unscrewed from the boiler

body and screwed on the opposite side of the boiler. The door

is screwed to the hinge, and the door handle is unscrewed from

the door and screwed to the opposite side of the door. The

draft regulator is fixed at the top of the boiler depending on the

direction of door opening. The chain mounting plate is mounted

on the hinge side.

4. Door handle

5. Spring washer

6. Screw DIN 912 M8x14