Galleon SIGNALCLOCK V2 설치 및 사용자 설명서 - 페이지 6
{카테고리_이름} Galleon SIGNALCLOCK V2에 대한 설치 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Galleon SIGNALCLOCK V2 19 페이지.
페이지 인쇄INSTALLATION
The mounting instructions slightly differ for the 4-digit and 6-digit models due to their different
dimensions. Please follow the instructions that are relevant for your SignalClock model.
MOUNTING THE 4-DIGIT MODEL
1. Locate the two slots on the back of the clock that allow the clock to be mounted to the
wall using two screws.
2. Measure a horizontal line of exactly 300mm in the area of your choice, the end points of
which represent the drilling locations for the screws.
3. Drill the holes and insert wall plugs into the wall to prevent the screws from coming loose.
4. Fit the screws into the plugs.
5. When the clock is ready, connect the Ethernet cable to the rear of the clock and hang it on
the wall.
MOUNTING THE 6-DIGIT MODEL
1. Locate the two slots on the back of the clock that allow the clock to be mounted to the
wall using two screws.
2. Measure a horizontal line of exactly 480mm in the area of your choice, the end points of
which represent the drilling locations for the screws.
3. Drill the holes and insert wall plugs into the wall to prevent the screws from coming loose.
4. Fit the screws into the plugs.
5. When the clock is ready, connect the Ethernet cable to the rear of the clock and hang it on
the wall.
www.galsys.co.uk
galleonsupport.com
SIGNALCLOCK V2 Manual
6
TEL:
+44 (0) 121 608 4433
FAX:
+44 (0) 121 608 4477