DCS DCS-VH-30HS 사용 및 설치 매뉴얼 - 페이지 8

{카테고리_이름} DCS DCS-VH-30HS에 대한 사용 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DCS DCS-VH-30HS 18 페이지. The professional vent hoods
DCS DCS-VH-30HS에 대해서도 마찬가지입니다: 사용 및 설치 매뉴얼 (18 페이지)

페이지 인쇄

INSTALL VENT HOOD INTO SOFFIT

At this point in the installation process, the inner liner should be removed from the Hood and set aside

(see-Pgs 5 & 6).With the liner set aside, there is clear access to the Soffit mounting holes and wall

mounting holes in the rear panel of the unit.

Once the soffit framing has been completed, place assembled vent hood (hood, rough-in kit, and

ventilator) into place and secure hood to the soffit frame with 6 wood screws.

NOTE: Additionally, we recommend the installer utilize the holes provided in the rear panel of the hood to

secure the hood to the rear wall and minimize any noise and vibration of the unit.

NOTE: Assure that the mounting screws are long enough to be driven through the wood shims into the

installed 2" x 4"s for total support. -see fig.3

-GO TO FINISHING THE INSTALLATION- Pg. 9

FIG.03

2 x 4's

installed per

Fig. 1

3/8" Soffit

mounting

holes in

Vent Hood

(6 total)

TOP VIEW (48" MODEL SHOWN)

"B"

Rough-in Kit

(23-1/2 x 10-1/2")

ALL MODELS

FRONT VIEW

"A"

Rough-in Kit

Soffit Mounting Screws (6)

12"

25"

2 x 4's in Soffit

Outer 2 x 4's

(48" Models only)

CEILING DRYWALL