GALLERY 36 사용 설명서 - 페이지 4

{카테고리_이름} GALLERY 36에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. GALLERY 36 18 페이지. Canvas stretching machine

Installation (Optional Item)

The universal bench mount consists of (2) brackets a left-hand and a right-hand,

identified by the small tab on the front that favors one side more as viewed from the

front.

Find the centerline of your workbench and make a mark, now measure to your left

21.125" and place bracket left-hand bracket so that the outside edge of the top bracket is

touching the line. Now measure 21.125" to the right of the centerline and install right-

hand bracket. The span between the left and right top brackets should be 42.25". The

distance between the 2 small tabs should be 39". These tabs trap the machine between

them. The photo below shows the right-hand bracket on the outside edge of the machine.

Video Clip of Process

21.125"

centerline

Nylon screw applies gentle pressure

on the left and right side of machine to

reduce movement.

(shown with deck of machine

removed for clarity)