GALLERY GS-60 사용 설명서 - 페이지 2

{카테고리_이름} GALLERY GS-60에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. GALLERY GS-60 17 페이지.

Unpacking & Set-up

Inside The Box

(1) Two foot pedals (detent type) mounted on base plate

(1) Pair Stretcher Blocks

(1) Instruction manual

(1) Pair safety glasses

(2) T-wrenches

(1) Air hose to machine

Bench Mounting (Gusseted Brackets not included)

Your machine was designed to be mounted in front of a typical workbench this is the

most effective method. This is best accomplished with gusseted brackets that can be

purchased at any big box store. Snap a line at 3.25" from the top of the workbench and

install gusseted brackets on the line. It is recommended that a plywood façade be

installed on the face of the workbench to provide support for the bottom leg.

The GS-60 has hose fittings beneath the machine. You will need to allow access to these

fittings to avoid crimping the hose. The best way to do this is to use gusseted brackets

and nothing else. The hose should hang straight down and the machine rests on them.

(you may decide to use small "c" clamps to secure it from below)

Grey

STAPLE GUN

Orange

Yellow

STRETCH PEDAL

White

Black

CLAMP PEDAL