Dynaudio Contour 소유자 매뉴얼 - 페이지 12

{카테고리_이름} Dynaudio Contour에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynaudio Contour 17 페이지.
Dynaudio Contour에 대해서도 마찬가지입니다: 소유자 매뉴얼 (20 페이지), 소유자 매뉴얼 (20 페이지), 소유자 매뉴얼 (17 페이지)

페이지 인쇄

Owner's Manual Contour

30°

90°

150°

Multi-channel

Dynaudio loudspeakers are designed to offer the most

advanced performance in both stereo and multi-channel

setup

applications. When connecting a loudspeaker to a

multi-channel setup, in general the same guidelines

as mentioned in the text above will apply

P22

0°

30°

90°

150°

Fig. 6 5.1 and 7.1 multi-channel speaker setup.

Loudspeakers for

Corresponding to the surround format

multi-channel setups

5.1 or 7.1, you need to install additional

speakers:

For a multi-channel setup, in addition

to the two main (stereo) loudspeakers,

5.1: The standard multi-channel setup

additional channels (speakers) may

with two side/surround speakers,

be added to reproduce dialogue and

preferably placed at the sides or slightly

surround effects. With the center channel

behind the listening position

and compact models, it is possible

7.1: Two rear speakers are added

to achieve the same high level of

directly behind the listening position,

performance and sound on every channel.

typically on the back wall

Center speaker

Subwoofer

The center is responsible for the

Most often a subwoofer will be utilized for

information directed from the middle of the

the LFE-signal, especially in larger listening

screen and should be positioned between

rooms. The position of the subwoofer will

the right and left main loudspeakers.

be dependent upon the size of the room

In a home theater/surround setup, the

and its acoustics. Please refer to the

center supports the images and should be

Subwoofer manual.

placed close to the screen.

Side/Rear speakers

The side/rear speakers are responsible

Note

for the sound effects behind the listening

When setting up a home theatre system, the loudspeakers should create a realistic

position. When using the compact models

soundstage with similar sound characteristics on each channel. It is therefore

as side/rear speakers, the speakers can

important that all speakers should match the same quality level. This is especially

be placed onto a shelf, mounted at the

important with regards to the center channel loudspeaker, as this is a critical aspect

side/rear wall or placed on a stand. This

of any multi-channel soundstage. Dynaudio has developed various models suitable

allows you a wide variety of placements,

for multi-channel applications: Compact and floor standing models with a matching

even if your listening room and furniture

center channel, all optimized for use with Dynaudio active subwoofers and Dynaudio

limit an optimal setup.

optional accessory products.

Mulit-Channel Setup

Multi-channel loudspeaker

setup

Thus, a complete multi-channel setup

consists of following speakers

1 Front (stereo) speakers

2 Center speaker

3 Side/Surround speakers

4 Rear speakers (as explained above)

5 Subwoofer (possible position)

Because there are many different setup

options – from 5.1 to 10.2 channel

applications – and the fact that

loudspeaker positioning will also

depend upon the room's shape, please

consult your Dynaudio dealer for special

applications and for placement options.

P23