HIGHLY LIQUID MD24 사용자 설명서 - 페이지 10

{카테고리_이름} HIGHLY LIQUID MD24에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIGHLY LIQUID MD24 10 페이지.

Highly Liquid

MD24 Hardware Revision G

8.3 Servo Wiring

Each MD24 output can be configured as a "servo mode" output. A servo mode output generates a 5V

pulse width modulation (PWM) servo control signal. See MD24 Firmware User Manual for more details.

A servo has three leads: ground, power input, and control input ("signal"). Each lead is identified by

color: ground is usually black, blue or brown; power input is usually red; and signal is usually white,

yellow, or orange. Exact colors vary by servo brand and model.

MD24-to-servo wiring is shown in Figure 8.2. Output #18 is used as an example, but the circuit can be

connected to any servo mode output. Repeat as needed for each servo/MD24 output pair.

The MD24 provides only the control signal. The power supply for the servo must be provided separately.

See the documentation provided by the servo manufacturer for power supply requirements. Most RC

servos will operate using a 5VDC or 6VDC power source.

Figure 8.2: Servo Output Wiring

Page 10 / 10