HighPoint R1108 Series 빠른 설치 매뉴얼 - 페이지 8

{카테고리_이름} HighPoint R1108 Series에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HighPoint R1108 Series 10 페이지. Replacing the thermal silicone
HighPoint R1108 Series에 대해서도 마찬가지입니다: 빠른 설치 매뉴얼 (10 페이지), 빠른 설치 매뉴얼 (6 페이지)

페이지 인쇄

Step 10. On the rear of the R1108, refasten the 6 screws that were

removed in step 1.

Note

Make sure the aluminum cover is properly aligned with the

：

controller board (PCB), and that it makes full contact with the thermal

pad, before refastening it to the R1108. If the cover is improperly

installed, the fan and thermal pad will be unable to sufficiently cool the

NVMe SSD's and controller componentry, which may result in damage

to the SSD's or controller hardware, performance loss, unstable I/O,

and the loss of data.

Step 11. Power up the SSD external power supply

Note:

If the external power supply is not powered on, the SSDs may

drop offline or remain undetected, which could lead to data loss.